[PATCH net-next 01/13] dt-bindings: net: dsa: realtek-smi: remove unsupported switches
From: luizluca@gmail.com
Date: 2021-12-16 20:14:15
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Andrew Lunn, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Luiz Angelo Daros de Luca <luizluca@gmail.com> Remove some switch models that are not cited in the code. Although rtl8366s was kept, it looks like a stub driver (with a FIXME comment). Reviewed-by: Arınç ÜNAL <redacted> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> --- .../devicetree/bindings/net/dsa/realtek-smi.txt | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
index 7959ec237983..3a60e77ceed4 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt@@ -4,20 +4,15 @@ Realtek SMI-based Switches The SMI "Simple Management Interface" is a two-wire protocol using bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does not use the MDIO protocol. This binding defines how to specify the -SMI-based Realtek devices. +SMI-based Realtek devices. The realtek-smi driver is a platform driver +and it must be inserted inside a platform node. Required properties: - compatible: must be exactly one of: "realtek,rtl8365mb" (4+1 ports) - "realtek,rtl8366" "realtek,rtl8366rb" (4+1 ports) "realtek,rtl8366s" (4+1 ports) - "realtek,rtl8367" - "realtek,rtl8367b" - "realtek,rtl8368s" (8 port) - "realtek,rtl8369" - "realtek,rtl8370" (8 port) Required properties: - mdc-gpios: GPIO line for the MDC clock line.
--
2.34.0