Re: [PATCH 6/6] Input: elantech - add v3 hardware support
From: Wanlong Gao <hidden>
Date: 2011-08-19 00:16:34
Also in:
lkml
On 08/18/2011 10:25 PM, Seth Forshee wrote:
On Thu, Aug 18, 2011 at 08:58:53AM -0500, Seth Forshee wrote:quoted
The case 3 code is nearly identical to case 2. How about this? case 2: __set_bit(BTN_TOOL_QUADTAP, dev->keybit); /* fall through */ case 3: input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); /* range of pressure and width is the same as v2 */ input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, ETP_PMAX_V2, 0, 0); input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); input_mt_init_slots(dev, 2); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); break;Sorry, that should have been: case 2: __set_bit(BTN_TOOL_QUADTAP, dev->keybit); /* fall through */ case 3: input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0); if (etd->reports_pressure) { input_set_abs_params(dev, ABS_PRESSURE, ETP_PMIN_V2, ETP_PMAX_V2, 0, 0); input_set_abs_params(dev, ABS_TOOL_WIDTH, ETP_WMIN_V2, ETP_WMAX_V2, 0, 0); } __set_bit(INPUT_PROP_SEMI_MT, dev->propbit); input_mt_init_slots(dev, 2); input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0); input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0); break;
simplify, seems good. Thanks -Wanlong Gao
-- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html