On 25.02.2025 16:16:38, Ming Yu wrote:

[...]

+static int nct6694_usb_probe(struct usb_interface *iface,
+			     const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(iface);
+	struct usb_endpoint_descriptor *int_endpoint;
+	struct usb_host_interface *interface;
+	struct device *dev = &iface->dev;
+	struct nct6694 *nct6694;
+	int pipe, maxp;
+	int ret;
+
+	nct6694 = devm_kzalloc(dev, sizeof(*nct6694), GFP_KERNEL);
+	if (!nct6694)
+		return -ENOMEM;
+
+	pipe = usb_rcvintpipe(udev, NCT6694_INT_IN_EP);
+	maxp = usb_maxpacket(udev, pipe);
+
+	nct6694->usb_msg = devm_kzalloc(dev, sizeof(union nct6694_usb_msg), GFP_KERNEL);
+	if (!nct6694->usb_msg)
+		return -ENOMEM;
+
+	nct6694->int_buffer = devm_kzalloc(dev, maxp, GFP_KERNEL);
+	if (!nct6694->int_buffer)
+		return -ENOMEM;
+
+	nct6694->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!nct6694->int_in_urb)
+		return -ENOMEM;
+
+	nct6694->domain = irq_domain_add_simple(NULL, NCT6694_NR_IRQS, 0,
+						&nct6694_irq_domain_ops,
+						nct6694);
+	if (!nct6694->domain) {
+		ret = -ENODEV;
+		goto err_urb;
+	}
+
+	nct6694->dev = dev;
+	nct6694->udev = udev;
+	nct6694->timeout = NCT6694_URB_TIMEOUT;	/* Wait until URB completes */

Why do you need this variable? You can directly use NCT6694_URB_TIMEOUT
in the usb_bulk_msg() and friends calls.

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |