Thread (92 messages) 92 messages, 4 authors, 2022-02-25

Re: [PATCH v2 17/23] arm64: dts: mt8192: Add vcodec lat and core nodes

From: Nícolas F. R. A. Prado <hidden>
Date: 2022-02-22 22:34:05
Also in: linux-devicetree, linux-mediatek, lkml

On Fri, Feb 18, 2022 at 05:16:27PM +0800, Allen-KH Cheng wrote:
quoted hunk ↗ jump to hunk
Add vcodec lat and core nodes for mt8192 SoC.

Signed-off-by: Allen-KH Cheng <redacted>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 58 ++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 936aa788664f..543a80252ce5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -1291,6 +1291,64 @@
 			power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
 		};
 
+		vcodec_dec: vcodec_dec@16000000 {
It's usually preferred to use '-' instead of '_' in the node name, like:

		vcodec_dec: vcodec-dec@16000000 {

Same thing for the other vcodec nodes below.

But more importantly, the Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
dt-binding shows the mtk-vcodec-lat and mtk-vcodec-core as subnodes of
vcodec-dec. So I would follow that same structure here. Unless it does make more
sense to have the nodes separate like this, but in that case the dt-binding
should be updated.
+			compatible = "mediatek,mt8192-vcodec-dec";
+			reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+			mediatek,scp = <&scp>;
+			iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+		};
+
+		vcodec_lat: vcodec_lat@0x16010000 {
Again, please drop the '0x' prefix.
+			compatible = "mediatek,mtk-vcodec-lat";
+			reg = <0 0x16010000 0 0x800>;		/* VDEC_MISC */
+			interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+				<&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+			clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+				 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+				 <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+				 <&topckgen CLK_TOP_MAINPLL_D4>;
+			clock-names = "vdec-sel", "vdec-soc-vdec", "vdec-soc-lat", "vdec-vdec",
+				      "vdec-top";
+			assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+			power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+		};
+
+		vcodec_core: vcodec_core@0x16025000 {
Ditto.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help