Thread (92 messages) 92 messages, 4 authors, 2022-02-25

Re: [PATCH v2 07/23] arm64: dts: mt8192: Add xhci node

From: Nícolas F. R. A. Prado <hidden>
Date: 2022-02-22 20:28:15
Also in: linux-devicetree, linux-mediatek, lkml

On Fri, Feb 18, 2022 at 05:16:17PM +0800, Allen-KH Cheng wrote:
quoted hunk ↗ jump to hunk
Add xhci node for mt8192 SoC.

Signed-off-by: Allen-KH Cheng <redacted>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 25 ++++++++++++++++++++++++
 1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index ce18d692175f..08c7c1c772f5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8192-power.h>
 
 / {
@@ -718,6 +719,30 @@
 			status = "disabled";
 		};
 
+		xhci: xhci@11200000 {
According to Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml, this
node should be called usb (but the label can be kept as xhci).
+			compatible = "mediatek,mt8192-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x1000>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-names = "host";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>,
+					  <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+						 <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+			clocks = <&infracfg CLK_INFRA_SSUSB>,
+				 <&infracfg CLK_INFRA_SSUSB_XHCI>,
+				 <&apmixedsys CLK_APMIXED_USBPLL>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			wakeup-source;
+			mediatek,syscon-wakeup = <&pericfg 0x420 102>;
+			#address-cells = <2>;
+			#size-cells = <2>;
This node doesn't have any children, so no need for #address-cells and
#size-cells, just drop them.

Also, let's keep this node disabled by default:

			status = "disabled";
+		};
+
 		nor_flash: spi@11234000 {
 			compatible = "mediatek,mt8192-nor";
 			reg = <0 0x11234000 0 0xe0>;
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help