Re: [PATCH net-next 03/13] ravb: Add no_ptp_cfg_active to struct ravb_hw_info

There are some H/W differences for the gPTP feature between
R-Car Gen3, R-Car Gen2, and RZ/G2L as below.

1) On R-Car Gen2, gPTP support is not active in config mode.
2) On R-Car Gen3, gPTP support is active in config mode.
3) RZ/G2L does not support the gPTP feature.

Add a no_ptp_cfg_active hw feature bit to struct ravb_hw_info for
handling gPTP for R-Car Gen2.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/net/ethernet/renesas/ravb.h      |  1 +
 drivers/net/ethernet/renesas/ravb_main.c | 20 ++++++++++++--------
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index da486e06b322..9ecf1a8c3ca8 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h

@@ -998,6 +998,7 @@ struct ravb_hw_info {
 	unsigned internal_delay:1;	/* AVB-DMAC has internal delays */
 	unsigned tx_counters:1;		/* E-MAC has TX counters */
 	unsigned multi_irqs:1;		/* AVB-DMAC and E-MAC has multiple irqs */
+	unsigned no_ptp_cfg_active:1;	/* AVB-DMAC does not support gPTP active in config mode */