Thread (42 messages) 42 messages, 6 authors, 2021-08-20

Re: [PATCH net-next 00/18] Add Gigabit Ethernet driver support

From: Sergei Shtylyov <hidden>
Date: 2021-07-22 20:55:32
Also in: linux-renesas-soc

On 7/22/21 5:13 PM, Biju Das wrote:
The DMAC and EMAC blocks of Gigabit Ethernet IP is almost similar to Ethernet AVB.

The Gigabit Etherner IP consists of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC).

With few changes in driver, we can support Gigabit ethernet driver as well.

This patch series is aims to support the same

RFC->V1
  * Incorporated feedback from Andrew, Sergei, Geert and Prabhakar
  * https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=515525

Biju Das (18):
  dt-bindings: net: renesas,etheravb: Document Gigabit Ethernet IP
  drivers: clk: renesas: rzg2l-cpg: Add support to handle MUX clocks
  drivers: clk: renesas: r9a07g044-cpg: Add ethernet clock sources
  drivers: clk: renesas: r9a07g044-cpg: Add GbEthernet clock/reset

   It's not a good idea to have the patch to the defferent subsystems lumped
all together in a single series...
  ravb: Replace chip type with a structure for driver data
   I was expecting some real changes on how the gen2/3 diff. features in this patch,
but I only saw new info having no real changes where they were needed and having the
changes that did not need to be converted yet...
   Anwyay, I have stopped here for today.
  ravb: Factorise ptp feature
  ravb: Add features specific to R-Car Gen3
  ravb: Add R-Car common features
  ravb: Factorise ravb_ring_free function
  ravb: Factorise ravb_ring_format function
  ravb: Factorise ravb_ring_init function
  ravb: Factorise {emac,dmac} init function
  ravb: Factorise ravb_rx function
  ravb: Factorise ravb_adjust_link function
  ravb: Factorise ravb_set_features
  ravb: Add reset support
  ravb: Add GbEthernet driver support
  arm64: dts: renesas: r9a07g044: Add GbEther nodes
[...]

MBR, Sergei
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help