[PATCH 41/61] 8xx: Keep a global mpc8xx_immr mapping.

@@ -48,6 +48,7 @@ static void m8xx_cpm_dpinit(void);
 static uint host_buffer; /* One page of host buffer */
 static uint host_end;    /* end + 1 */
 cpm8xx_t *cpmp;          /* Pointer to comm processor space */
+immap_t *mpc8xx_immr;
 cpic8xx_t *cpic_reg;
 
 static struct device_node *cpm_pic_node;

@@ -197,21 +198,26 @@ end:
 
 void cpm_reset(void)
 {
-	cpm8xx_t *commproc;
 	sysconf8xx_t *siu_conf;
 
-	commproc = (cpm8xx_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
+	mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
+	if (!mpc8xx_immr) {
+		printk(KERN_CRIT "Could not map IMMR\n");
+		return;
+	}
+
+	cpmp = &mpc8xx_immr->im_cpm;
 
 #ifdef CONFIG_UCODE_PATCH
 	/* Perform a reset.
 	*/
-	out_be16(&commproc->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
+	out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
 
 	/* Wait for it.
 	*/
-	while (in_be16(&commproc->cp_cpcr) & CPM_CR_FLG);
+	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
 
-	cpm_load_patch(commproc);
+	cpm_load_patch(cpmp);
 #endif
 
 	/* Set SDMA Bus Request priority 5.

@@ -226,10 +232,6 @@ void cpm_reset(void)
 
 	/* Reclaim the DP memory for our use. */
 	m8xx_cpm_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	*/
-	cpmp = commproc;
 }
 
 /* We used to do this earlier, but have to postpone as long as possible

@@ -32,22 +32,11 @@
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 
-#define immr_map(member)						\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      sizeof( ((immap_t*)0)->member));		\
-	addr;								\
-})
-
-#define immr_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset, size);		\
-	addr;								\
-})
-
-#define immr_unmap(addr)		iounmap(addr)
+extern immap_t *mpc8xx_immr;
+
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) iounmap(addr)
 #endif
 
 static inline int uart_baudrate(void)