[PATCH v5 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers
From: Paul Cercueil <paul@crapouillou.net>
Date: 2017-04-28 20:10:00
Also in:
linux-devicetree, linux-gpio, linux-mips, linux-mmc, linux-pwm, lkml
Subsystem:
ingenic jz47xx socs, mips, the rest · Maintainers:
Paul Cercueil, Thomas Bogendoerfer, Linus Torvalds
We set the pin configuration for the jz4780-nand and jz4780-uart drivers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/mips/boot/dts/ingenic/ci20.dts | 60 +++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) v2: Changed the devicetree bindings to match the new driver v3: No changes v4: No changes v5: No changes
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 1652d8d60b1e..fd138d9978c1 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts@@ -29,18 +29,30 @@ &uart0 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; }; &uart1 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1>; }; &uart3 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; }; &uart4 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart4>; }; &nemc {
@@ -61,6 +73,13 @@ ingenic,nemc-tAW = <15>; ingenic,nemc-tSTRV = <100>; + /* + * Only CLE/ALE are needed for the devices that are connected, rather + * than the full address line set. + */ + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + nand@1 { reg = <1>;
@@ -69,6 +88,9 @@ nand-ecc-mode = "hw"; nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + partitions { compatible = "fixed-partitions"; #address-cells = <2>;
@@ -106,3 +128,41 @@ &bch { status = "okay"; }; + +&pinctrl { + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; + + pins_uart1: uart1 { + function = "uart1"; + groups = "uart1-data"; + bias-disable; + }; + + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + + pins_uart4: uart4 { + function = "uart4"; + groups = "uart4-data"; + bias-disable; + }; + + pins_nemc: nemc { + function = "nemc"; + groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; + bias-disable; + }; + + pins_nemc_cs1: nemc-cs1 { + function = "nemc-cs1"; + groups = "nemc-cs1"; + bias-disable; + }; +};
--
2.11.0