[PATCH 08/13] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers
From: Paul Cercueil <paul@crapouillou.net>
Date: 2017-01-17 23:16:53
Also in:
linux-devicetree, linux-gpio, linux-mips, linux-mmc, linux-pwm, lkml
Subsystem:
ingenic jz47xx socs, mips, the rest · Maintainers:
Paul Cercueil, Thomas Bogendoerfer, Linus Torvalds
We set the pin configuration for the jz4780-nand and jz4780-uart drivers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- arch/mips/boot/dts/ingenic/ci20.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 1652d8d60b1e..e2cd3ebb7be8 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts@@ -29,18 +29,30 @@ &uart0 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0_data>; }; &uart1 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart1_data>; }; &uart3 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2_dataplusflow>; }; &uart4 { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart4_data>; }; &nemc {
@@ -61,6 +73,16 @@ ingenic,nemc-tAW = <15>; ingenic,nemc-tSTRV = <100>; + /* + * Only CLE/ALE are needed for the devices that are connected, rather + * than the full address line set. + */ + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_data + &pins_nemc_cle_ale + &pins_nemc_rd_we + &pins_nemc_frd_fwe>; + nand@1 { reg = <1>;
@@ -69,6 +91,9 @@ nand-ecc-mode = "hw"; nand-on-flash-bbt; + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc_cs1>; + partitions { compatible = "fixed-partitions"; #address-cells = <2>;
--
2.11.0