Thread (87 messages) 87 messages, 5 authors, 2018-07-09

[linux-sunxi] [PATCH v3 24/24] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra

From: Chen-Yu Tsai <hidden>
Date: 2018-06-28 02:51:40
Also in: dri-devel, linux-clk, linux-devicetree, lkml

On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Since HDMI can be considered as main output, most capable mixer is
connected to it (mixer0).

Signed-off-by: Jernej Skrabec <redacted>
---
 .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts  | 45 +++++++++++++++++++
 1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 27d9ccd0ef2f..0ebc2f9a980e 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -58,6 +58,17 @@
                stdout-path = "serial0:115200n8";
        };

+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
        leds {
                compatible = "gpio-leds";
@@ -93,6 +104,10 @@
        };
 };

+&de {
+       status = "okay";
+};
+
 &ehci1 {
        status = "okay";
 };
@@ -101,6 +116,16 @@
        status = "okay";
 };

+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
 &i2c0 {
        status = "okay";
@@ -195,6 +220,26 @@
        status = "okay";
 };

+&tcon_top_hdmi_in_tcon_tv0 {
+       remote-endpoint = <&tcon_tv0_out_tcon_top>;
+};
+
+&tcon_top_mixer0_out_tcon_tv0 {
+       remote-endpoint = <&tcon_tv0_in_tcon_top>;
+};
+
+&tcon_tv0_in {
+       tcon_tv0_in_tcon_top: endpoint {
+               remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+       };
+};
+
+&tcon_tv0_out {
+       tcon_tv0_out_tcon_top: endpoint {
+               remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+       };
+};
+
This is the wrong place for this. Once removed,

Reviewed-by: Chen-Yu Tsai <redacted>
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pb_pins>;
--
2.18.0

--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help