[PATCH v3 24/24] ARM: dts: sun8i: r40: Enable HDMI output on BananaPi M2 Ultra
From: Jernej Skrabec <hidden>
Date: 2018-06-25 12:06:02
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Since HDMI can be considered as main output, most capable mixer is connected to it (mixer0). Signed-off-by: Jernej Skrabec <redacted> --- .../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 27d9ccd0ef2f..0ebc2f9a980e 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts@@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds";
@@ -93,6 +104,10 @@ }; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; };
@@ -101,6 +116,16 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay";
@@ -195,6 +220,26 @@ status = "okay"; }; +&tcon_top_hdmi_in_tcon_tv0 { + remote-endpoint = <&tcon_tv0_out_tcon_top>; +}; + +&tcon_top_mixer0_out_tcon_tv0 { + remote-endpoint = <&tcon_tv0_in_tcon_top>; +}; + +&tcon_tv0_in { + tcon_tv0_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; +}; + +&tcon_tv0_out { + tcon_tv0_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>;
--
2.18.0