[PATCH v3 18/24] drm/sun4i: DW HDMI PHY: Add support for second PLL
STALE3007d
From: Jernej Skrabec <hidden>
Date: 2018-06-25 12:05:43
Also in:
dri-devel, linux-clk, linux-devicetree, lkml
Subsystem:
drm driver for allwinner de2 and de3 engine, drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest · Maintainers:
Chen-Yu Tsai, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Linus Torvalds
Revision v3 of 2 in this series.
Revisions (2)
- v2 [diff vs current]
- v3 current
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select between two clock parents. Add code which reads second PLL from DT. Signed-off-by: Jernej Skrabec <redacted> --- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 ++ drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 20 +++++++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 3ba71aff92fc..46a3aa6a53a9 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h@@ -147,6 +147,7 @@ struct sun8i_hdmi_phy; struct sun8i_hdmi_phy_variant { bool has_phy_clk; + bool has_second_pll; void (*phy_init)(struct sun8i_hdmi_phy *phy); void (*phy_disable)(struct dw_hdmi *hdmi, struct sun8i_hdmi_phy *phy);
@@ -160,6 +161,7 @@ struct sun8i_hdmi_phy { struct clk *clk_mod; struct clk *clk_phy; struct clk *clk_pll0; + struct clk *clk_pll1; unsigned int rcal; struct regmap *regs; struct reset_control *rst_phy;
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e56b9e5b1c42..f0877b3f67e7 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c@@ -482,10 +482,19 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node) goto err_put_clk_mod; } + if (phy->variant->has_second_pll) { + phy->clk_pll1 = of_clk_get_by_name(node, "pll-1"); + if (IS_ERR(phy->clk_pll1)) { + dev_err(dev, "Could not get pll-1 clock\n"); + ret = PTR_ERR(phy->clk_pll1); + goto err_put_clk_pll0; + } + } + ret = sun8i_phy_clk_create(phy, dev); if (ret) { dev_err(dev, "Couldn't create the PHY clock\n"); - goto err_put_clk_pll0; + goto err_put_clk_pll1; } clk_prepare_enable(phy->clk_phy);
@@ -528,9 +537,10 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node) reset_control_put(phy->rst_phy); err_disable_clk_phy: clk_disable_unprepare(phy->clk_phy); +err_put_clk_pll1: + clk_put(phy->clk_pll1); err_put_clk_pll0: - if (phy->variant->has_phy_clk) - clk_put(phy->clk_pll0); + clk_put(phy->clk_pll0); err_put_clk_mod: clk_put(phy->clk_mod); err_put_clk_bus:
@@ -551,8 +561,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi) reset_control_put(phy->rst_phy); - if (phy->variant->has_phy_clk) - clk_put(phy->clk_pll0); + clk_put(phy->clk_pll0); + clk_put(phy->clk_pll1); clk_put(phy->clk_mod); clk_put(phy->clk_bus); }
--
2.18.0