Thread (28 messages) 28 messages, 4 authors, 2015-07-03

[PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer

flat view
STALE4127d SUPERSEDED

From: robert.jarzmik@free.fr (Robert Jarzmik)
Date: 2015-07-03 15:28:19
Also in: linux-i2c

Revision v2 of 8 in this series.

Revisions (8)
  1. v1 [diff vs current]
  2. v1 [diff vs current]
  3. v1 [diff vs current]
  4. v2
  5. v2 current
  6. v2
  7. v3 [diff vs current]
  8. v4 [diff vs current]

Possibly related (same subject, not in this thread)

Vaibhav Hiremath [off-list ref] writes:
quoted hunk ↗ jump to hunk
 #define _IBMR(i2c)	((i2c)->reg_ibmr)
@@ -286,6 +287,22 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
 static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
 static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id);
 
+/* enable/disable i2c unit */
+static inline int i2c_pxa_is_enabled(struct pxa_i2c *i2c)
+{
+	return (readl(_ICR(i2c)) & ICR_IUE);
+}
+
+static inline void i2c_pxa_enable(struct pxa_i2c *i2c, bool enable)
+{
+	if (enable && !i2c_pxa_is_enabled(i2c)) {
+		writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
+		udelay(100);
+	} else {
+		writel(readl(_ICR(i2c)) & ~ICR_IUE, _ICR(i2c));
+	}
+}
+
 static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
 {
 	return !(readl(_ICR(i2c)) & ICR_SCLE);
@@ -482,8 +499,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 	i2c_pxa_set_slave(i2c, 0);
 
 	/* enable unit */
-	writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
-	udelay(100);
+	i2c_pxa_enable(i2c, true);
 }
 
 
@@ -840,6 +856,9 @@ static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
 	struct pxa_i2c *i2c = adap->algo_data;
 	int ret, i;
 
+	/* Enable i2c unit */
+	i2c_pxa_enable(i2c, true);
+
 	/* If the I2C controller is disabled we need to reset it
 	  (probably due to a suspend/resume destroying state). We do
 	  this here as we can then avoid worrying about resuming the
@@ -860,6 +879,11 @@ static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
 	ret = -EREMOTEIO;
  out:
 	i2c_pxa_set_slave(i2c, ret);
+
+	/* disable i2c unit */
+	if (i2c->disable_after_xfer)
+		i2c_pxa_enable(i2c, false);
+
 	return ret;
 }
 
@@ -1075,6 +1099,9 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
 	struct pxa_i2c *i2c = adap->algo_data;
 	int ret, i;
 
+	/* Enable i2c unit */
+	i2c_pxa_enable(i2c, true);
Okay, what happens in master mode when we get there on the 2nd xfer :
 - i2c is enabled AFAIU.
 - as a consequence i2c_pxa_is_enabled() returns true
 - as a consequence, i2c_pxa_enable() _disables_ the i2c, right ?
 - as a consequence i2c is broken

Is this correct, because if it is the patch needs a rework ?

Cheers.

--
Robert
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help