quoted
arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dtb: ethernet-phy@7: clocks: [[7, 36], [7, 37]] is too long
from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: ethernet-phy@7: clocks: [[7, 36], [7, 37]] is too long
from schema $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
These pop up as the phy needs to enable 2 clocks (RX and TX) during probe
which conflicts with the restriction set in ethernet-phy.yaml which says:
clocks:
maxItems: 1
Would you like me to add a condition in qca,ar803x.yaml on the compatible
(PHY ID) to override it and set it to two?
Likewise on resets, right now we I've got 1 reset (a bitmask that actually
triggers 4 resets) to conform to the bindings. If, as per ongoing
discussion, I need to list all resets, it will also conflict with the
restriction on resets of max 1 item.
You should describe the hardware. If the hardware has more than one
reset or clock, describe them all, and please fixup the binding to
suit.
Andrew