[PATCH v3 09/15] iio: resolver: ad2s1210: use gpiod_multi_set_value_cansleep
From: David Lechner <dlechner@baylibre.com>
Date: 2025-02-10 22:37:58
Also in:
linux-gpio, linux-iio, linux-mmc, linux-phy, linux-sound, lkml
Subsystem:
analog devices inc iio drivers, iio subsystem and drivers, the rest · Maintainers:
Nuno Sá, Michael Hennerich, Jonathan Cameron, Linus Torvalds
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of gpiod_set_array_value(). These are not called in an atomic context, so changing to the cansleep variant is fine. Reviewed-by: Linus Walleij <redacted> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: David Lechner <dlechner@baylibre.com> --- drivers/iio/resolver/ad2s1210.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/resolver/ad2s1210.c b/drivers/iio/resolver/ad2s1210.c
index b681129a99b6cf399668bf01a1f5a15fbc4f95b8..7f18df790157f1e411fb70de193a49f0677c999f 100644
--- a/drivers/iio/resolver/ad2s1210.c
+++ b/drivers/iio/resolver/ad2s1210.c@@ -182,8 +182,7 @@ static int ad2s1210_set_mode(struct ad2s1210_state *st, enum ad2s1210_mode mode) bitmap[0] = mode; - return gpiod_set_array_value(gpios->ndescs, gpios->desc, gpios->info, - bitmap); + return gpiod_multi_set_value_cansleep(gpios, bitmap); } /*
@@ -1473,10 +1472,7 @@ static int ad2s1210_setup_gpios(struct ad2s1210_state *st) bitmap[0] = st->resolution; - ret = gpiod_set_array_value(resolution_gpios->ndescs, - resolution_gpios->desc, - resolution_gpios->info, - bitmap); + ret = gpiod_multi_set_value_cansleep(resolution_gpios, bitmap); if (ret < 0) return dev_err_probe(dev, ret, "failed to set resolution gpios\n");
--
2.43.0