[PATCH v8 02/14] dt-bindings: net: ethernet-controller: add 10g-qxgmii mode
flat view
STALE1013d
REVIEWED: 11 (11M)
From: Luo Jie <hidden>
Date: 2023-12-15 07:41:01
Also in:
linux-devicetree, linux-doc, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v8 of 7 in this series; 2 review trailers.
Revisions (7)
From: Vladimir Oltean <vladimir.oltean@nxp.com> Add the new interface mode 10g-qxgmii, which is similar to usxgmii but extend to 4 channels to support maximum of 4 ports with the link speed 10M/100M/1G/2.5G. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Luo Jie <redacted> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index d14d123ad7a0..0ef6103c5fd8 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml@@ -104,6 +104,7 @@ properties: - usxgmii - 10gbase-r - 25gbase-r + - 10g-qxgmii phy-mode: $ref: "#/properties/phy-connection-type"
--
2.42.0