[PATCH v2 27/28] dt-bindings: net: fsl,qmc-hdlc: Add framer support
From: Herve Codina <herve.codina@bootlin.com>
Date: 2023-07-26 15:17:47
Also in:
alsa-devel, linux-devicetree, linux-gpio, linuxppc-dev, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
A framer can be connected to the QMC HDLC. If present, this framer is the interface between the TDM used by the QMC HDLC and the E1/T1 line. The QMC HDLC can use this framer to get information about the line and configure the line. Add an optional framer property to reference the framer itself. Signed-off-by: Herve Codina <herve.codina@bootlin.com> --- Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
index 8bb6f34602d9..bf29863ab419 100644
--- a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml@@ -27,6 +27,11 @@ properties: Should be a phandle/number pair. The phandle to QMC node and the QMC channel to use. + framer: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the framer node + required: - compatible - fsl,qmc-chan
--
2.41.0