On Mon, Oct 04, 2021 at 03:15:27PM -0400, Sean Anderson wrote:

Some modules have something at SFP_PHY_ADDR which isn't a PHY. If we try to
probe it, we might attach genphy anyway if addresses 2 and 3 return
something other than all 1s. To avoid this, add a quirk for these modules
so that we do not probe their PHY.

The particular module in this case is a Finisar SFP-GB-GE-T. This module is
also worked around in xgbe_phy_finisar_phy_quirks() by setting the support
manually. However, I do not believe that it has a PHY in the first place:

$ i2cdump -y -r 0-31 $BUS 0x56 w
     0,8  1,9  2,a  3,b  4,c  5,d  6,e  7,f
00: ff01 ff01 ff01 c20c 010c 01c0 0f00 0120
08: fc48 000e ff78 0000 0000 0000 0000 00f0
10: 7800 00bc 0000 401c 680c 0300 0000 0000
18: ff41 0000 0a00 8890 0000 0000 0000 0000

The first several addresses contain the same value, which should almost
never be the case for a proper phy. In addition, the "OUI" 00-7F-C3 does
not match Finisar's OUI of 00-90-65 (or any other OUI for that matter).

Signed-off-by: Sean Anderson <redacted>

Hi Sean

This does not really have anything to do with PCS. I would send it on
its own.

    Andrew