Hi Marc,

On 09/09/2014 11:34 AM, Marc Kleine-Budde wrote:

On 09/09/2014 10:30 AM, Roger Quadros wrote:

quoted

quoted

quoted

+            compatible = "bosch,d_can";
+            ti,hwmods = "dcan1";
+            reg = <0x4ae3c000 0x2000>,
+                  <0x558 0x4>; /* index to RAMINIT reg within syscon */
+            raminit-syscon = <&dra7_ctrl_core>;
+            raminit-start-bit = <3>;
+            raminit-done-bit = <1>;
+            raminit-pulse;

   Hm, aren't the above 4 properties vendor specific? If so, they should start with a vendor prefix and comma.

At least for now I don't know about any other platform other than TI using a RAMINIT register outside the
CAN register space. However the mechanism is generic enough and not limited to TI platforms.

I don't mind vendor prefix or not, but would like to hear the opinion of the CAN maintainers as to what they would prefer.

I don't know of any c_can/d_can implementation outside of TI that
implements the raminit outside of the register space. So a "ti," prefix
seems appropriate.

Fine, I'll re-spin this with the "ti," prefix. Thanks.

cheers,
-roger