[PATCH 07/13] ARM: dts: dra72-evm: Add CAN support
From: Roger Quadros <hidden>
Date: 2014-09-08 14:10:36
Also in:
linux-can, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
The board has 2 CAN ports but only the first one can be used. Enable the first CAN port. The second one cannot be used without hardware modification so we don't enable the second port. Signed-off-by: Roger Quadros <redacted> --- arch/arm/boot/dts/dra72-evm.dts | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 5147023..e5b7172 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts@@ -19,6 +19,29 @@ }; }; +&dra7_pmx_core { + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x3d4 (PIN_INPUT | MUX_MODE0) /* dcan1_tx */ + 0x418 (PIN_INPUT | MUX_MODE1) /* wakeup0.dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + 0x3d4 (PIN_INPUT | MUX_MODE15) /* dcan1_tx.off */ + 0x418 (PIN_INPUT | MUX_MODE15) /* wakeup0.off */ + >; + }; +}; + &uart1 { status = "okay"; }; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; +};
--
1.8.3.2