[PATCH 06/13] ARM: dts: dra7-evm: Add CAN support
From: Roger Quadros <hidden>
Date: 2014-09-08 14:10:35
Also in:
linux-can, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
The board has 2 CAN ports but only the first one can be used. Enable the first CAN port. The second one cannot be used without hardware modification so we don't enable the second port. Signed-off-by: Roger Quadros <redacted> Reviewed-by: Felipe Balbi <redacted> --- arch/arm/boot/dts/dra7-evm.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index e03fbf3..d6b9b27 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts@@ -171,6 +171,20 @@ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ >; }; + + dcan1_pins_default: dcan1_pins_default { + pinctrl-single,pins = < + 0x3d4 (PIN_INPUT | MUX_MODE0) /* dcan1_tx */ + 0x3d8 (PIN_INPUT | MUX_MODE0) /* dcan1_rx */ + >; + }; + + dcan1_pins_sleep: dcan1_pins_sleep { + pinctrl-single,pins = < + 0x3d4 (PIN_INPUT | MUX_MODE15) /* dcan1_tx */ + 0x3d8 (PIN_INPUT | MUX_MODE15) /* dcan1_rx */ + >; + }; }; &i2c1 {
@@ -529,3 +543,10 @@ ti,no-reset-on-init; ti,no-idle-on-init; }; + +&dcan1 { + status = "ok"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; +};
--
1.8.3.2