Re: [PATCH V2 09/12] net/eipoib: Add main driver functionality

Eric W. Biederman [off-list ref] wrote:

Ali Ayoub [off-list ref] writes:

[...]

quoted

I don't see in other alternatives a solution for the problem we're
trying to solve. If there are changes/suggestions to improve eIPoIB
netdev driver to avoid "messing with the link layer" and make it
acceptable, we can discuss and apply them.

Nothing needs to be applied the code is done.  Routing from
IPoE to IPoIB works. There is nothing in what anyone has posted as requirements
 that needs work to implement.

I totally fail to see how getting packets of of the VM as ethernet
frames, and then  IP layer routing those packets over IP is not an
option.  What requirement am I missing.

As you've indicated routing w/w.o using proxy-arp is an option, however,

All VMs should suport that mode of operation, and certainly the kernel does.
Implementations involving bridges like macvlan and macvtap are
performance optimizations, and the optimizations don't even apply in
areas like 802.11, where only one mac address is supported per adapter.
Bridging can ocassionally also be an administrative simplification as
well, but you should be able to achieve the a similar simplification
with a dhcprelay and proxy arp.

as you wrote here, when performance and ease-of-use is under the spot,
VM deployments tend to not to use routing.

This is b/c it involves more over-head on the packet forwarding, and
more administration work, for example, for setting routing rules that
involve the VM IP address, something which AFAIK the hypervisor have
no clue on, also its unclear to me if/how live migration can work in
such setting.

From this exact reason, there's a bunch of use-cases by tools and

cloud stacks (such as open stack, ovirt, more) which do use bridged
mode and the rest of the Ethernet envelope, such as using virtual L2
vlan domains, ebtables based rules, etc etc. Where they and are not
application to ipoib, but are working file ith eipoib.

You mentioned that bridging mode doesn't apply to environment such as
802.11, and hence routing mode is used, we are trying to make a point
here that bridging mode applies to ipoib with the approach suggested
by eipoib.

Also, if we extend the discussion a bit, there are two more aspects to throw in:

The first is the performance thing we have already started to mention
-- specifically, the approach for RX zero copy (into the VM buffer),
use designs such as vhost + macvtap NIC in passthrough mode which is
likey to be set over a per VM hypervisor NIC, e.g such as the ones
provided by VMDQ patches John Fastabend started to post (see
http://marc.info/?l=linux-netdev&m=134264998405581&w=2) -- the ib0.N
clone child are IPoIB VMDQ NICs if you like, and setting an eipoib NIC
on top of each they can be plugged to that design.

The 2nd aspect, is NON VM environments where a NIC with Ethernet look
and feel is required for IP traffic, but this have to live within an
echo-system that fully uses IPoIB.
In other words, a use case where IPoIB has to be below the cover for
set of some specific apps, or nodes but do IP interaction with other
apps/nodes and gateways who use IPoIB, the eIPoIB driver provides that
functionality.

So, to sum up, routing / proxy-arp seems to be off where we are targeting.

Or.