Re: [PATCH 1/8] pseries: phyp dump: Docmentation

On Wed, Jan 09, 2008 at 10:12:13PM -0600, Linas Vepstas wrote:

On 09/01/2008, Olof Johansson [off-list ref] wrote:

quoted

On Wed, Jan 09, 2008 at 08:33:53PM -0600, Linas Vepstas wrote:

quoted

Heh. That's the elbow-grease of this thing.  The easy part is to get
the core function working. The hard part is to test these various configs,
and when they don't work, figure out what went wrong. That will take
perseverence and brains.

This just sounds like a whole lot of extra work to get a feature that
already exists.

Well, no. kexec is horribly ill-behaved with respect to PCI. The
kexec kernel starts running with PCI devices in some random
state; maybe they're DMA'ing or who knows what. kexec tries
real hard to whack a few needed pci devices into submission
but it has been hit-n-miss, and the source of 90% of the kexec
headaches and debugging effort. Its not pretty.

It surprises me that this hasn't been possible to resolve with less than
architecting a completely new interface, given that the platform has
all this fancy support for isolating and resetting adapters. After all,
the exact same thing has to be done by the hypervisor before rebooting
the partition.

If all pci-host bridges could shut-down or settle the bus, and
raise the #RST line high, and then if all BIOS'es supported
this, you'd be right. But they can't ....

This argument doesn't hold. We're not talking about some generic PC with
a crappy BIOS here, we're specifically talking about POWER6 PHYP. It
certainly already has ways to reset adapters in it, or EEH wouldn't
work. Actually, the whole phyp dump feature wouldn't work either, since
it's exactly what the firmware has to do under the covers as well.


-Olof