Hi Conor,

On Mon, Aug 22, 2022 at 2:13 PM [off-list ref] wrote:

On 22/08/2022 12:46, Geert Uytterhoeven wrote:

quoted

On Sun, Aug 21, 2022 at 12:07 PM [off-list ref] wrote:

quoted

On 21/08/2022 07:45, Icenowy Zheng wrote:

quoted

在 2022-08-20星期六的 17:29 +0000，Conor.Dooley@microchip.com写道：

quoted

On 20/08/2022 18:24, Samuel Holland wrote:

quoted

quoted

quoted

quoted

quoted

This is not feasible, due to the different #interrupt-cells. See
https://lore.kernel.org/linux-riscv/CAMuHMdXHSMcrVOH+vcrdRRF+i2TkMcFisGxHMBPUEa8nTMFpzw@mail.gmail.com/ (local)

Even if we share some file across architectures, you still have to
update files
in both places to get the interrupts properties correct.

I get the desire to deduplicate things, but we already deal with
updating the
same/similar nodes across several SoCs, so that is nothing new. I
think it would
be more confusing/complicated to have all of the interrupts
properties
overridden in a separate file.

Yeah, should maybe have circled back after that conversation, would
have been
nice but if the DTC can't do it nicely then w/e.

Well, maybe we can overuse the facility of C preprocessor?

e.g.

// For ARM
#define SOC_PERIPHERAL_IRQ(n) GIC_SPI n
// For RISC-V
#define SOC_PERIPHERAL_IRQ(n) n

Geert pointed out that this is not possible (at least on the Renesas
stuff) because the GIC interrupt numbers are not the same as the
PLIC's & the DTC is not able to handle the addition:
https://lore.kernel.org/linux-riscv/CAMuHMdXHSMcrVOH+vcrdRRF+i2TkMcFisGxHMBPUEa8nTMFpzw@mail.gmail.com/ (local)

Without the ability to do additions in DTC, we could e.g. list both
interrupts in the macro, like:

     // For ARM
     #define SOC_PERIPHERAL_IRQ(na, nr) GIC_SPI na
     // For RISC-V
     #define SOC_PERIPHERAL_IRQ(na, nr) nr

Do you think this is worth doing? Or are you just providing an
example of what could be done?

Just some brainstorming...

Where would you envisage putting these macros? I forget the order
of the CPP operations that are done, can they be put in the dts?

The SOC_PERIPHERAL_IRQ() macro should be defined in the
ARM-based SoC.dtsi file and the RISC-V-based SoC.dtsi file.

quoted

On Mon, Aug 22, 2022 at 12:52 PM Andre Przywara [off-list ref] wrote:

quoted

There are interrupt-maps for that:
sun8i-r528.dtsi:
         soc {
                 #interrupt-cells = <1>;
                 interrupt-map = <0  18 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
                                 <0  19 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
                                 ....

sun20i-d1.dtsi:
         soc {
                 #interrupt-cells = <1>;
                 interrupt-map = <0  18 &plic  18 IRQ_TYPE_LEVEL_HIGH>,
                                 <0  19 &plic  19 IRQ_TYPE_LEVEL_HIGH>,

then, in the shared .dtsi:
                 uart0: serial@2500000 {
                         compatible = "snps,dw-apb-uart";
                         ...
                         interrupts = <18>;

Nice! But it's gonna be a very large interrupt-map.

I quite like the idea of not duplicating files across the archs
if it can be helped, but not at the expense of making them hard to
understand & I feel like unfortunately the large interrupt map is
in that territory.

I feel the same.
Even listing both interrupt numbers in SOC_PERIPHERAL_IRQ(na, nr)
is a risk for making mistakes.

So personally, I'm in favor of teaching dtc arithmetic, so we can
handle the offset in SOC_PERIPHERAL_IRQ().

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds