Re: [PATCHv3 14/27] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The reset value is all zero, so set a workable value for Primary,
Secondary and Subordinate bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
---
V3:
 - No change

 drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index db7ecb021c63..9210165fe8c0 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c

@@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
        u32 value, pab_ctrl, type;
        struct resource_entry *win;

+       /* setup bus numbers */
+       value = csr_readl(pcie, PCI_PRIMARY_BUS);
+       value &= 0xff000000;
+       value |= 0x00ff0100;
+       csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
        /*
         * program Bus Master Enable Bit in Command Register in PAB Config
         * Space
--

2.17.1