[PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings
From: Phil Edworthy <hidden>
Date: 2014-03-21 10:32:44
Also in:
linux-arm-kernel, linux-pci, linux-sh
Subsystem:
open firmware and flattened device tree bindings, pci driver for renesas r-car, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Marek Vasut, Yoshihiro Shimoda, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2014-03-24 · Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings · Lucas Stach <hidden>
- 2014-03-24 · Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings · <hidden>
- 2014-03-24 · Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings · <hidden>
- 2014-03-24 · Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings · Ben Dooks <hidden>
- 2014-03-24 · Re: [PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings · <hidden>
This patch adds the bindings for the rcar PCIE driver. The driver resides under drivers/pci/host/pcie-rcar.c Signed-off-by: Phil Edworthy <redacted> --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
new file mode 100644
index 0000000..0e219b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt@@ -0,0 +1,40 @@ +* Renesas RCar PCIe interface + +Required properties: +- compatible: should contain one of the following + "renesas,r8a7779-pcie", "renesas,r8a7790-pcie", "renesas,r8a7791-pcie" +- reg: base addresses and lengths of the pcie controller. +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions +- interrupts: interrupt values for MSI interrupt +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. +- clock-names: from common clock binding: should be "pcie" + +Example: + +SoC specific DT Entry: + + pcie: pcie@0x01000000 { + compatible = "renesas,r8a7790-pcie"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + interrupts = <0 116 4>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 4>; + clocks = <&mstp3_clks R8A7790_CLK_PCIE>; + clock-names = "pcie"; + status = "disabled"; + };
--
1.9.0