[PATCH v4 5/9] dt-bindings: pci: rcar pcie device tree bindings
From: Phil Edworthy <hidden>
Date: 2014-03-21 10:32:44
Also in:
linux-devicetree, linux-pci, linux-sh
Subsystem:
open firmware and flattened device tree bindings, pci driver for renesas r-car, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Marek Vasut, Yoshihiro Shimoda, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
This patch adds the bindings for the rcar PCIE driver. The driver resides under drivers/pci/host/pcie-rcar.c Signed-off-by: Phil Edworthy <redacted> --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
new file mode 100644
index 0000000..0e219b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt@@ -0,0 +1,40 @@ +* Renesas RCar PCIe interface + +Required properties: +- compatible: should contain one of the following + "renesas,r8a7779-pcie", "renesas,r8a7790-pcie", "renesas,r8a7791-pcie" +- reg: base addresses and lengths of the pcie controller. +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions +- interrupts: interrupt values for MSI interrupt +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI properties + to define the mapping of the PCIe interface to interrupt + numbers. +- clocks: from common clock binding: handle to pci clock. +- clock-names: from common clock binding: should be "pcie" + +Example: + +SoC specific DT Entry: + + pcie: pcie at 0x01000000 { + compatible = "renesas,r8a7790-pcie"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + interrupts = <0 116 4>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 4>; + clocks = <&mstp3_clks R8A7790_CLK_PCIE>; + clock-names = "pcie"; + status = "disabled"; + };
--
1.9.0