Re: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series

On 8/6/2021 10:44 PM, Matthew Hagan wrote:

Changes from v2:
   - Introduce boards to Makefile in same patch as the board dts is added
     (Vladimir Oltean)
   - Use alphabetical ordering for labels (Vladimir Oltean)
   - Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
     Oltean)
   - Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
   - Various LED fixes, utilising dt-bindings/leds/common.h and correctly
     specifying LEDs in the form "led-N" and with the color/function/
     function-enumerator properties.
   - Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)

The following changes were submitted as a separate series:
   - Introduce patches to disable QSPI by default and enable where used
     (Vladimir Oltean)
   - Move mdio@18032000 node from board related file to SoC (Vladimir
     Oltean)
   - In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
     the resulting usb3_phy issues

Changes from v3:
   - Sort labels on mx64 a0 dts files into alphabetical order as well
   - move include directives for input/input.h and leds/common.h to
     bcm958625-mx6x-common.dtsi
   - Whitespace fixes in bcm958625-mx6x-common.dtsi
   - rename "senao_nvram" partition to "nvram"

Changes from v4:
   - Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
     each .dts file (Arnd Bergmann).
   - Append [@<unit-address>] to memory nodes.
   - Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
   - Append read-only property to at24 eeprom node.
   - Remove L2 properties which should be defined at platform-level.
   - Correct NAND node names.

I applied patch 1 first such that we don't get warnings when we apply 
patches from there on during bisection builds.
-- 
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel