Re: [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-08-22 19:07:47
Also in:
linux-devicetree, lkml
On Fri, 6 Aug 2021 21:44:34 +0100, Matthew Hagan [off-list ref] wrote:
MX64 & MX64W Hardware info: - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR) - Storage: 1 GB (Micron MT29F8G08ABACA) - Networking: BCM58625 internal switch (5x 1GbE ports) - USB: 1x USB2.0 - Serial: Internal header - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus This patch adds the Meraki MX64 series-specific bindings. Since some devices make use of the older A0 SoC, changes need to be made to accommodate this case, including removal of coherency options and modification to the secondary-boot-reg. Signed-off-by: Matthew Hagan <redacted> ---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel