Re: [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2021-08-22 19:08:18
Also in:
linux-devicetree, lkml
On Fri, 6 Aug 2021 21:44:35 +0100, Matthew Hagan [off-list ref] wrote:
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <redacted>
---Applied to https://github.com/Broadcom/stblinux/commits/master, thanks! -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel