On 8/6/2021 10:44 PM, Matthew Hagan wrote:
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
I applied patch 1 first such that we don't get warnings when we apply patches from there on during bisection builds.
--
Florian