Thread (54 messages) 54 messages, 4 authors, 2021-05-28

Re: [PATCH 11/16] dt-bindings: clock: renesas: Document RZ/G2L SoC CPG driver

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2021-05-27 11:51:53
Also in: linux-clk, linux-devicetree, linux-renesas-soc, linux-serial, lkml

Hi Prabhakar,

On Fri, May 21, 2021 at 8:43 PM Lad, Prabhakar
[off-list ref] wrote:
On Fri, May 21, 2021 at 4:04 PM Geert Uytterhoeven [off-list ref] wrote:
quoted
On Fri, May 14, 2021 at 9:23 PM Lad Prabhakar
[off-list ref] wrote:
quoted
Document the device tree bindings of the Renesas RZ/G2L SoC clock
driver in Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Thanks for your patch!
quoted
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas RZ/G2L Clock Pulse Generator / Module Stop and Software Reset
(Module Standby Mode
quoted
+
+maintainers:
+  - Geert Uytterhoeven [off-list ref]
+
+description: |
+  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and MSTP
+  (Module Stop and Software Reset) share the same register block.
+
+  They provide the following functionalities:
+    - The CPG block generates various core clocks,
+    - The MSTP block provides two functions:
+        1. Module Stop, providing a Clock Domain to control the clock supply
+           to individual SoC devices,
+        2. Reset Control, to perform a software reset of individual SoC devices.
+
+properties:
+  compatible:
+    const: renesas,r9a07g044l-cpg  # RZ/G2L
renesas,r9a07g044-cpg?
As some IP blocks present in RZ/G2L aren't present in RZ/G2LC clock
handling will differ so as a result SoC specific compatible string is
added.
The RZ/G2L Hardware User's Manual Rev. 0.41 doesn't mention any
differences between the CPG on RZ/G2L and RZ/G2LC.  So I think it's
safe to have a single driver for both members.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help