Thread (64 messages) 64 messages, 10 authors, 2020-06-06

Re: [PATCHv9 03/12] PCI: mobiveil: Collect the interrupt related operations into a routine

From: Andrew Murray <hidden>
Date: 2020-01-13 10:34:38
Also in: linux-devicetree, linux-pci, lkml

On Wed, Nov 20, 2019 at 03:45:37AM +0000, Z.q. Hou wrote:
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Collect the interrupt initialization related operations into
a new routine to make it more readable.
I prefer the word 'function' instead of routine. Also indicate why, not only
is it nicer but it is in preparation for EP support.
quoted hunk ↗ jump to hunk
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
V9:
 - New patch splited from the #1 of V8 patches to make it easy to review.

 drivers/pci/controller/pcie-mobiveil.c | 65 +++++++++++++++++---------
 1 file changed, 42 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index 97f682ca7c7a..512b27a0536e 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -454,12 +454,6 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
 		return PTR_ERR(pcie->csr_axi_slave_base);
 	pcie->pcie_reg_base = res->start;
 
-	/* map MSI config resource */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr");
-	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pcie->apb_csr_base))
-		return PTR_ERR(pcie->apb_csr_base);
-
 	/* read the number of windows requested */
 	if (of_property_read_u32(node, "apio-wins", &pcie->apio_wins))
 		pcie->apio_wins = MAX_PIO_WINDOWS;
@@ -467,12 +461,6 @@ static int mobiveil_pcie_parse_dt(struct mobiveil_pcie *pcie)
 	if (of_property_read_u32(node, "ppio-wins", &pcie->ppio_wins))
 		pcie->ppio_wins = MAX_PIO_WINDOWS;
 
-	rp->irq = platform_get_irq(pdev, 0);
-	if (rp->irq <= 0) {
-		dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
-		return -ENODEV;
-	}
-
 	return 0;
 }
 
@@ -618,9 +606,6 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	pab_ctrl |= (1 << AMBA_PIO_ENABLE_SHIFT) | (1 << PEX_PIO_ENABLE_SHIFT);
 	mobiveil_csr_writel(pcie, pab_ctrl, PAB_CTRL);
 
-	mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
-			    PAB_INTP_AMBA_MISC_ENB);
-
 	/*
 	 * program PIO Enable Bit to 1 and Config Window Enable Bit to 1 in
 	 * PAB_AXI_PIO_CTRL Register
@@ -670,9 +655,6 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
 	value |= (PCI_CLASS_BRIDGE_PCI << 16);
 	mobiveil_csr_writel(pcie, value, PAB_INTP_AXI_PIO_CLASS);
 
-	/* setup MSI hardware registers */
-	mobiveil_pcie_enable_msi(pcie);
-
 	return 0;
 }
 
@@ -873,6 +855,46 @@ static int mobiveil_pcie_init_irq_domain(struct mobiveil_pcie *pcie)
 	return 0;
 }
 
+static int mobiveil_pcie_interrupt_init(struct mobiveil_pcie *pcie)
+{
+	struct platform_device *pdev = pcie->pdev;
+	struct device *dev = &pdev->dev;
+	struct root_port *rp = &pcie->rp;
+	struct resource *res;
+	int ret;
+
+	/* map MSI config resource */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb_csr");
+	pcie->apb_csr_base = devm_pci_remap_cfg_resource(dev, res);
+	if (IS_ERR(pcie->apb_csr_base))
+		return PTR_ERR(pcie->apb_csr_base);
+
+	/* setup MSI hardware registers */
+	mobiveil_pcie_enable_msi(pcie);
Does this need to come after mobiveil_pcie_init_irq_domain - given that
this function sets up the irq domain for MSI?

Thanks,

Andrew Murray
quoted hunk ↗ jump to hunk
+
+	rp->irq = platform_get_irq(pdev, 0);
+	if (rp->irq <= 0) {
+		dev_err(dev, "failed to map IRQ: %d\n", rp->irq);
+		return -ENODEV;
+	}
+
+	/* initialize the IRQ domains */
+	ret = mobiveil_pcie_init_irq_domain(pcie);
+	if (ret) {
+		dev_err(dev, "Failed creating IRQ Domain\n");
+		return ret;
+	}
+
+	irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
+
+	/* Enable interrupts */
+	mobiveil_csr_writel(pcie, (PAB_INTP_INTX_MASK | PAB_INTP_MSI_MASK),
+			    PAB_INTP_AMBA_MISC_ENB);
+
+
+	return 0;
+}
+
 int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie)
 {
 	struct root_port *rp = &pcie->rp;
@@ -906,15 +928,12 @@ int mobiveil_pcie_host_probe(struct mobiveil_pcie *pcie)
 		return ret;
 	}
 
-	/* initialize the IRQ domains */
-	ret = mobiveil_pcie_init_irq_domain(pcie);
+	ret = mobiveil_pcie_interrupt_init(pcie);
 	if (ret) {
-		dev_err(dev, "Failed creating IRQ Domain\n");
+		dev_err(dev, "Interrupt init failed\n");
 		return ret;
 	}
 
-	irq_set_chained_handler_and_data(rp->irq, mobiveil_pcie_isr, pcie);
-
 	/* Initialize bridge */
 	bridge->dev.parent = dev;
 	bridge->sysdata = pcie;
-- 
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help