[PATCH 09/15] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
From: Abhishek Sahu <hidden>
Date: 2018-02-03 11:37:26
Also in:
linux-arm-msm, linux-devicetree, lkml
On 2018-01-29 10:41, Sricharan R wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Sricharan R <redacted> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 14 ++++++++++++++ 2 files changed, 15 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dtsdiff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 68e4b15..0104ba2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk01.1-c2.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c5.dtb \ + qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dtsb/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts new file mode 100644 index 0000000..7a93fc4--- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts@@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017, The Linux Foundation. All rights reserved. + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3"; + + soc { + nand: qpic-nand at 79b0000 { + status = "disabled"; + };
Normally we need to disable in base dtsi and enable in board dtsi so that base dtsi will always work in all the boards. Now If We load the base dtsi in any DK04 board other than C1, then nand failure will come. Thanks, Abhishek