Thread (30 messages) 30 messages, 4 authors, 2018-02-07

[PATCH 05/15] ARM: dts: ipq4019: Add ipq4019-ap-dk01-c2 board file

From: Abhishek Sahu <hidden>
Date: 2018-02-03 10:56:00
Also in: linux-arm-msm, linux-devicetree, lkml

On 2018-01-29 10:41, Sricharan R wrote:
quoted hunk ↗ jump to hunk
The board has a spi-nand interface on spi0 bus chipselect1.

Signed-off-by: Sricharan R <redacted>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts | 25
+++++++++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9..21ed56d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -724,6 +724,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
 	qcom-ipq4019-ap.dk01.1-c1.dtb \
+	qcom-ipq4019-ap.dk01.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
new file mode 100644
index 0000000..e3442da
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C2";
  s/IPQ40xx/IPQ4019
+
+	soc {
+		spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
+			status = "ok";
+			cs-gpios = <&tlmm 54 0>, <&tlmm 59 0>;
  the base dk01 file has pinmux for 54 only.
  for 59 pin, we need to add pinmux entry also.

  Thanks,
  Abhishek
+			num-cs = <2>;
+
+			mt29f at 1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spinand,mt29f";
+				reg = <1>;
+				spi-max-frequency = <24000000>;
+			};
+
+		};
+	};
+};
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help