On 2018-01-29 10:41, Sricharan R wrote:

dk04.1-c5 has a spinand connected to spi bus0 chipselect 1.

Signed-off-by: Sricharan R <redacted>
---
 arch/arm/boot/dts/Makefile                      |  1 +
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c5.dts | 23
+++++++++++++++++++++++
 2 files changed, 24 insertions(+)

  <snip>

+		spi_0: spi at 78b5000 { /* BLSP1 QUP1 */
+			status = "ok";
+			cs-gpios = <&tlmm 12 0>, <&tlmm 45 0>;

  Same applies here also. We need to add pinumx
  for gpio45.

  Thanks,
  Abhishek

+			num-cs = <2>;
+
+			mt29f at 1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spinand,mt29f";
+				reg = <1>;
+				spi-max-frequency = <24000000>;
+			};
+		};
+	};
+};