[PATCH 01/14] ARM: dts: sun8i: Add SID node
From: Chen-Yu Tsai <hidden>
Date: 2016-06-24 02:42:10
Also in:
linux-devicetree, lkml
On Fri, Jun 24, 2016 at 3:20 AM, [off-list ref] wrote:
quoted hunk ↗ jump to hunk
From: Josef Gajdusek <redacted> Add a node describing the Security ID memory to the Allwinner H3 .dtsi file. Signed-off-by: Josef Gajdusek <redacted> --- arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 4a4926b..172576d 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi@@ -389,6 +389,13 @@ #size-cells = <0>; }; + sid: eeprom at 01c14000 { + compatible = "allwinner,sun4i-a10-sid";
This has been discussed before. The hardware is not compatible. The write control registers are at different offsets. ChenYu
+ reg = <0x01c14000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
usbphy: phy at 01c19400 {
compatible = "allwinner,sun8i-h3-usb-phy";
reg = <0x01c19400 0x2c>,
--
2.9.0