[PATCH 08/22] clk: sunxi: Specify number of child clocks for divs clocks
From: Chen-Yu Tsai <hidden>
Date: 2014-05-23 08:32:58
Also in:
linux-devicetree, linux-serial, lkml
Subsystem:
arm/allwinner soc clock support, common clk framework, the rest · Maintainers:
Emilio López, Michael Turquette, Stephen Boyd, Linus Torvalds
Currently sunxi_divs_clk_setup assumes the number of child clocks to be the same as the number of clock-output-names, and a maximum of SUNXI_DIVS_MAX_QTY child clocks. On sun6i, PLL6 only has 1 child clock, but the parent would be used as well, thereby also having it's own clock-output-names entry. This results in an extra bogus clock being registered. This patch adds an entry for the number of child clocks alongside the data structures for them. Signed-off-by: Chen-Yu Tsai <redacted> --- drivers/clk/sunxi/clk-sunxi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 6500a1b..6857c6e 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c@@ -933,6 +933,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node, struct divs_data { const struct factors_data *factors; /* data for the factor clock */ + int ndivs; /* number of children */ struct { u8 fixed; /* is it a fixed divisor? if not... */ struct clk_div_table *table; /* is it a table based divisor? */
@@ -952,6 +953,7 @@ static struct clk_div_table pll6_sata_tbl[] = { static const struct divs_data pll5_divs_data __initconst = { .factors = &sun4i_pll5_data, + .ndivs = 2, .div = { { .shift = 0, .pow = 0, }, /* M, DDR */ { .shift = 16, .pow = 1, }, /* P, other */
@@ -960,6 +962,7 @@ static const struct divs_data pll5_divs_data __initconst = { static const struct divs_data pll6_divs_data __initconst = { .factors = &sun4i_pll6_data, + .ndivs = 2, .div = { { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ { .fixed = 2 }, /* P, other */
@@ -990,7 +993,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, struct clk_fixed_factor *fix_factor; struct clk_divider *divider; void *reg; - int i = 0; + int ndivs = SUNXI_DIVS_MAX_QTY, i = 0; int flags, clkflags; /* Set up factor clock that we will be dividing */
@@ -1013,7 +1016,11 @@ static void __init sunxi_divs_clk_setup(struct device_node *node, * our RAM clock! */ clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; - for (i = 0; i < SUNXI_DIVS_MAX_QTY; i++) { + /* if number of children known, use it */ + if (data->ndivs) + ndivs = data->ndivs; + + for (i = 0; i < ndivs; i++) { if (of_property_read_string_index(node, "clock-output-names", i, &clk_name) != 0) break;
--
2.0.0.rc2