[PATCH 1/3] ARM: OMAP2+: nand: unify init functions

Hi Afzal,

On 06/11/2012 09:01 AM, Afzal Mohammed wrote:

Helper function for updating nand platform data has been
added the capability to take timing structure arguement.
Usage of omap_nand_flash_init() has been replaced by modifed
one, omap_nand_flash_init was doing things similar to
board_nand_init except that NAND CS# were being acquired
based on bootloader setting. As CS# is hardwired for a given
board, acquiring gpmc CS# has been removed, and updated with
the value on board.

NAND CS# used in beagle board was found to be CS0.
Thomas Weber [off-list ref] reported
that value of devkit8000 to be CS0. Overo board was found
to be using CS0 based on u-boot, while google grep says
omap3touchbook too has CS0.

[1] also confirms the omap3-touchbook uses CS0.

Signed-off-by: Afzal Mohammed <redacted>

Which boards have been tested with this change?

Otherwise, looks good.

Reviewed-by: Jon Hunter <redacted>

Cheers
Jon

[1] http://www.alwaysinnovating.com/wiki/index.php/Booting