[PATCH v7 14/14] arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds
From: Frank Wunderlich <hidden>
Date: 2025-06-28 16:55:11
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, linux-pm, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
From: Frank Wunderlich <redacted> Assign pinctrl to switch phys and leds. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <redacted> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- v4: - reorder switch phy(-led) properties v2: - add labels and led-function and include after dropping from soc dtsi --- .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 4d709ee527df..7c9df606f60d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi@@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/richtek,rt5190a-regulator.h> +#include <dt-bindings/leds/common.h> #include "mt7988a.dtsi"
@@ -152,6 +153,66 @@ &gmac2 { sfp = <&sfp1>; }; +&gsw_phy0 { + pinctrl-0 = <&gbe0_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy0_led0 { + function = LED_FUNCTION_WAN; + color = <LED_COLOR_ID_GREEN>; + status = "okay"; +}; + +&gsw_port0 { + label = "wan"; +}; + +&gsw_phy1 { + pinctrl-0 = <&gbe1_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy1_led0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + status = "okay"; +}; + +&gsw_port1 { + label = "lan1"; +}; + +&gsw_phy2 { + pinctrl-0 = <&gbe2_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy2_led0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + status = "okay"; +}; + +&gsw_port2 { + label = "lan2"; +}; + +&gsw_phy3 { + pinctrl-0 = <&gbe3_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy3_led0 { + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + status = "okay"; +}; + +&gsw_port3 { + label = "lan3"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>;
--
2.43.0