Re: 回覆: 回覆: [net-next 4/4] net: ftgmac100: add RGMII delay for AST2600
- From
- Krzysztof Kozlowski <krzk@kernel.org>
- Date
- 2025-03-18 16:38:45
- Also in
- linux-arm-kernel, linux-aspeed, linux-devicetree, lkml
- Reply to
- Andrew Lunn, 2025-03-18
On 18/03/2025 14:51, Andrew Lunn wrote:
On Tue, Mar 18, 2025 at 05:34:08AM +0000, Jacky Chou wrote:quoted
Hi Andrew, Thank you for your reply.quoted
quoted
The RGMII delay of AST2600 has a lot of steps can be configured.Are they uniformly space? Then it should be a simple formula to calculate? Or a lookup table?There are fixed delay values by step. I list below. AST2600 MAC0/1 one step delay = 45 ps AST2600 MAC2/3 one step delay = 250 psThat is messy.quoted
I calculate all step and emulate them. The dt-binding will be like below. rx-internal-delay-ps: description: Setting this property to a non-zero number sets the RX internal delay for the MAC. ... skip ... enum: [45, 90, 135, 180, 225, 250, 270, 315, 360, 405, 450, 495, 500, 540, 585, 630, 675, 720, 750, 765, 810, 855, 900, 945, 990, 1000, 1035, 1080, 1125, 1170, 1215, 1250, 1260, 1305, 1350, 1395, 1440, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250, 3500, 3750, 4000, 4250, 4500, 4750, 5000, 5250, 5500, 5750, 6000, 6250, 6500, 6750, 7000, 7250, 7500, 7750, 8000]Can the hardware do 0 ps? So this list is a superset of both 45ps and 250ps steps?
git grep multipleOf: e.g. oneOf: - minimum: 45 maximum: ... multipleOf: 45 - minimum: 1500 maximum: ... multipleOf: 250
Lets see what the DT Maintainers say, but it could be you need two different compatibles for mac0/1 to mac2/3 because they are not actually compatible! You can then have a list per compatible.
If this is the only, *only* difference, then just go with vendor property matching register value... but oh, wait, how person reading and writing the DTS would understand if "0x2" means 90 ps or 1750 ps? I don't see how the original binding was helping here in total. Just moving the burden from driver developer to DTS developer. :/ If different instances are not the same, means the devices are not the same, so two compatibles seem reasonable. Best regards, Krzysztof