On 20.11.2023 10:58, Geert Uytterhoeven wrote:

On Mon, Nov 20, 2023 at 9:44 AM Arnd Bergmann [off-list ref] wrote:

quoted

On Mon, Nov 20, 2023, at 08:00, Claudiu wrote:

quoted

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

ravb driver is used by RZ/G1H. Enable it in multi_v7_defconfig.

Used by:
  - iWave-RZ/G1M/G1N Qseven carrier board,
  - iWave-RZ/G1H Qseven board,
  - iWave-RZG1E SODIMM carrier board,
  - iWave-RZ/G1C single board computer.

So I'd write "used by various iWave RZ/G1 development boards".

OK, I'll update it in v2.

I noticed it is needed while checking various bits on a RZ/G1H based board
so I considered that if there is at least one user for it it is enough to
have it enabled.

Thank you,
Claudiu Beznea

quoted

quoted

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

We have a mix of =y and =m for ethernet drivers, and usually
only have drivers built-in when they are frequently tested
with NFS root booting.

Do you need this as well, or could it be =m instead?

As the default chosen/bootargs for the iWave-RZ/G1M/G1N Qseven carrier
board contains root=/dev/nfs, builtin is appropriate.
The iWave-RZ/G1H Qseven board defaults to root=/dev/mmcblk0p1.

Gr{oetje,eeting}s,

                        Geert