On Mon, 14 Aug 2023 16:55:36 +0530, Sriranjani P wrote:

Add FSD Ethernet compatible in Synopsys dt-bindings document. Add FSD
Ethernet YAML schema to enable the DT validation.

Signed-off-by: Pankaj Dubey <redacted>
Signed-off-by: Ravi Patel <redacted>
Signed-off-by: Swathi K S <redacted>
Signed-off-by: Sriranjani P <redacted>
---
 .../devicetree/bindings/net/snps,dwmac.yaml   |   5 +-
 .../devicetree/bindings/net/tesla,ethqos.yaml | 114 ++++++++++++++++++
 2 files changed, 117 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/tesla,ethqos.yaml

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/tesla,ethqos.yaml: properties:clock-names: {'minItems': 5, 'maxItems': 10, 'items': [{'const': 'ptp_ref'}, {'const': 'master_bus'}, {'const': 'slave_bus'}, {'const': 'tx'}, {'const': 'rx'}, {'const': 'master2_bus'}, {'const': 'slave2_bus'}, {'const': 'eqos_rxclk_mux'}, {'const': 'eqos_phyrxclk'}, {'const': 'dout_peric_rgmii_clk'}]} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Documentation/devicetree/bindings/net/tesla,ethqos.example.dtb: /example-0/ethernet@14300000: failed to match any schema with compatible: ['tesla,dwc-qos-ethernet-4.21']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230814112539.70453-2-sriranjani.p@samsung.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.