On Wed, Sep 14, 2022 at 10:56 AM Arınç ÜNAL [off-list ref] wrote:
Add the missing LEDs for GB-PC2. The ethblack-green, ethblue-green, power
and system LEDs weren't added previously, because they don't exist on the
device schematics. Tests on a GB-PC2 by me and Petr proved otherwise.
The i2c bus cannot be used on GB-PC2 as its pins are wired to LEDs instead,
and GB-PC1 does not use it. Therefore, do not enable it on both devices.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC2_V1.1_schematic.pdf
Tested-by: Petr Louda <redacted>
Signed-off-by: Arınç ÜNAL <redacted>
---
.../boot/dts/ralink/mt7621-gnubee-gb-pc1.dts | 6 ---
.../boot/dts/ralink/mt7621-gnubee-gb-pc2.dts | 42 ++++++++++++++++---
2 files changed, 36 insertions(+), 12 deletions(-)
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>