[PATCH 02/10] dt-bindings: net: dsa: mediatek,mt7530: change mt7530 switch address
From: Arınç ÜNAL <hidden>
Date: 2022-09-14 08:56:33
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, linux-mips, lkml
Subsystem:
networking drivers, networking [dsa], open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Suggested-by: Sungbo Eo <redacted> Signed-off-by: Arınç ÜNAL <redacted> --- .../bindings/net/dsa/mediatek,mt7530.yaml | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index f9e7b6e20b35..2c73d13adf14 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml@@ -294,9 +294,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7530"; - reg = <0>; + reg = <0x1f>; reset-gpios = <&pio 33 0>;
@@ -356,9 +356,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7530"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <ðsys MT2701_ETHSYS_MCM_RST>;
@@ -486,9 +486,9 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>;
@@ -573,9 +573,9 @@ examples: reg = <4>; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>;
@@ -664,9 +664,9 @@ examples: phy-mode = "rgmii"; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>;
@@ -745,9 +745,9 @@ examples: phy-mode = "rgmii"; }; - switch@0 { + switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>;
--
2.34.1