[PATCH 08/10] mips: dts: ralink: mt7621: change mt7530 switch address
From: Arınç ÜNAL <hidden>
Date: 2022-09-14 08:57:30
Also in:
linux-arm-kernel, linux-devicetree, linux-mediatek, linux-mips, lkml
Subsystem:
mips, ralink mt7621 mips architecture, the rest · Maintainers:
Thomas Bogendoerfer, Chester A. Unal, Sergio Paracuellos, Linus Torvalds
In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Suggested-by: Sungbo Eo <redacted> Signed-off-by: Arınç ÜNAL <redacted> --- arch/mips/boot/dts/ralink/mt7621.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index 50799bb1cc5d..206078bd2284 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi@@ -338,9 +338,9 @@ mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - switch0: switch@0 { + switch0: switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm";
--
2.34.1