On 26.07.2022 23:02:08, Dario Binacchi wrote:

With this series I try to finish the task, started with the series [1],
of completely removing the dependency of the slcan driver from the
userspace slcand/slcan_attach applications.

The series also contains patches that remove the legacy stuff (slcan_devs,
SLCAN_MAGIC, ...) and do some module cleanup.

The series has been created on top of the patches:

can: slcan: convert comments to network style comments
can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level()
can: slcan: fix whitespace issues
can: slcan: convert comparison to NULL into !val
can: slcan: clean up if/else
can: slcan: use scnprintf() as a hardening measure
can: slcan: do not report txerr and rxerr during bus-off
can: slcan: do not sleep with a spin lock held

applied to linux-next.

[1] https://lore.kernel.org/all/20220628163137.413025-1-dario.binacchi@amarulasolutions.com/ (local)

Changes in v3:
- Update the commit message.
- Use 1 space in front of the =.
- Put the series as RFC again.

No need to change the series to RFC again :)

- Pick up the patch "can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names".
- Add the patch "ethtool: add support to get/set CAN bit time register"
  to the series.
- Add the patch "can: slcan: add support to set bit time register (btr)"
  to the series.
- Replace the link https://marc.info/?l=linux-can&m=165806705927851&w=2 with
  https://lore.kernel.org/all/507b5973-d673-4755-3b64-b41cb9a13b6f@hartkopp.net (local).
- Add the `Suggested-by' tag.

Please post a v4 with both BTR patches dropped and add Max Staudt's
Reviewed-by to patch 3.

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |