On Wed, Jul 27, 2022 at 7:21 PM Marc Kleine-Budde [off-list ref] wrote:

On 27.07.2022 17:55:10, Dario Binacchi wrote:

quoted

Hello Marc,

On Wed, Jul 27, 2022 at 1:31 PM Marc Kleine-Budde [off-list ref] wrote:

quoted

On 26.07.2022 23:02:16, Dario Binacchi wrote:

quoted

It allows to set the bit time register with tunable values.
The setting can only be changed if the interface is down:

ip link set dev can0 down
ethtool --set-tunable can0 can-btr 0x31c
ip link set dev can0 up

As far as I understand, setting the btr is an alternative way to set the
bitrate, right?

I thought of a non-standard bitrate or, in addition to the bitrate, the
possibility of enabling some specific CAN controller options. Maybe Oliver
could help us come up with the right answer.

This is the the slcan source code:
https://github.com/linux-can/can-utils/blob/cad1cecf1ca19277b5f5db39f8ef6f8ae426191d/slcand.c#L331
btr case cames after speed but they don't seem to be considered alternative.

quoted

I don't like the idea of poking arbitrary values into a
hardware from user space.

However this is already possible through the slcand and slcan_attach
applications.
Furthermore, the driver implements the LAWICEL ASCII protocol for CAN
frame transport over serial lines,
and this is one of the supported commands.

quoted

Do you have a use case for this?

I use the applications slcand and slcan_attach as a reference, I try to make the
driver independent from them for what concerns the CAN setup. And the bit time
register setting is the last dependency.

Ok - We avoided writing bit timing registers from user space into the
hardware for all existing drivers. If there isn't a specific use case,
let's skip this patch. If someone comes up with a use case we can think
of a proper solution.

Ok. So do I also remove the 7/9 "ethtool: add support to get/set CAN
bit time register"
patch ?

Thanks and regards,
Dario

Marc

--
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

-- 

Dario Binacchi

Embedded Linux Developer

dario.binacchi@amarulasolutions.com

__________________________________


Amarula Solutions SRL

Via Le Canevare 30, 31100 Treviso, Veneto, IT

T. +39 042 243 5310
info@amarulasolutions.com

www.amarulasolutions.com