[PATCH net-next 6/7] net: phy: marvell10g: support more rate matching modes
From: Marek Behún <kabel@kernel.org>
Date: 2021-03-24 16:51:53
Subsystem:
ethernet phy library, marvell mv88x3310 phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Russell King, Marek Behún, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The 88X3310P supports rate matching mode also for XAUI and RXAUI. Signed-off-by: Marek Behún <kabel@kernel.org> --- drivers/net/phy/marvell10g.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index b4f9831b4db6..c764795a142a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c@@ -596,13 +596,22 @@ static void mv3310_update_interface(struct phy_device *phydev) { struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); - /* In "XFI with Rate Matching" mode the PHY interface is fixed at - * 10Gb. The PHY adapts the rate to actual wire speed with help of + /* In all of the "* with Rate Matching" modes the PHY interface is fixed + * at 10Gb. The PHY adapts the rate to actual wire speed with help of * internal 16KB buffer. */ - if (priv->mactype == MV_V2_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH) { + switch (priv->mactype) { + case MV_V2_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH: phydev->interface = PHY_INTERFACE_MODE_10GBASER; return; + case MV_V2_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH: + phydev->interface = PHY_INTERFACE_MODE_XAUI; + return; + case MV_V2_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH: + phydev->interface = PHY_INTERFACE_MODE_RXAUI; + return; + default: + break; } if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
--
2.26.2